rexxjim

Reply to Clock missing on taskbar in WindowBlinds Stardock Forums

I checked for updates before I sent this post. I found out that I should have used Start11 Version 2 for this question (post).

Clock missing on taskbar in WindowBlinds Stardock Forums

After last WindowBlinds update, the clock is missing from the taskbar after the last update to WindowBlinds (Version 11.04, Windows 10 Pro 22H2) even though it is set on Windows taskbar settings (turned on).

Reply to Start11 version 1.39 in Stardock Software Stardock Forums

Thank you for your help and quick reply. Jim

Start11 version 1.39 in Stardock Software Stardock Forums

If you will look at my order history ( [email protected] ) ( e-mail removed by moderator ) you will see thyat I purchased One (1) License Key of Start 11 on Wednesday, August 11, 2021. I liked it so I decided to purchase the Five (5) Key license version on </s

Reply to Fences 3 on Windows 11 in Fences Stardock Forums

I found out that the problem was not Fences 3. The same problem (loop with message Fences has been disabled. Right click on Desktop to restart Fences) happened on my Lenovo 2-in1 laptop. The loop ran for 9 times and I looked and saw that the File Explorer windows that came up was skewed. Tat tells me that the problem was WindowBlinds 10. The problem only happens on Windows 11 and WindowBlinds 10. I had WindowBlinds 10 set t

Reply to Fences 3 on Windows 11 in Fences Stardock Forums

Windows 11 was stuck in a loop and a message (small Window, It told me to right-click to restart Fences, but could not because of the loop) from Fences told me that fences was disabled and I could not download your bat file to purge Fences. I had to re-image the laptop. Even the repair option on Windows 11 would not repair the problem. I tried to repair the OS from an USB flash drive. with a Windows 11 ISO image and tried to run sfc /scannow from a command prompt in admin mode. The re

Reply to Fences 3 on Windows 11 in Fences Stardock Forums

Forgot to mention that before the Fences 3.1.3.3 loop, File Explorer did not close correctly.

Fences 3 on Windows 11 in Fences Stardock Forums

Fences 3 on Windows 11 is stuck in a loop and will not let me refresh Fences. I also tried to start Fences from the Start Menu and was unable to start Fences again. The little window that came up with the error told me to right-click on the desktop and click on refresh. The loop time is so short it ill not let me right-click on the desktop.

Reply to Style Details - XP Luna in Curtains Stardock Forums

The .bat file was downloaded and executed. Rebooted and then downloaded the file from my profile of Stardock products. Executed the re-install of Curtains. Rebooted. After four successful reboots, Curtains has not changed from the Style of XP Luna. If it happens again, I will post a request again for help. Thank you for your help. Long time Stardock customer who is satisfied with the results of the fix.

Reply to Style Details - XP Luna in Curtains Stardock Forums

I forgot to answer the other question. It happens only when I boot and does not change until I boot again if at all. In other words, it does not change or happen every time I boot.

Reply to Style Details - XP Luna in Curtains Stardock Forums

It happens with Start 10 & Start 11. I also have Fences 3.

Style Details - XP Luna in Curtains Stardock Forums

I the product Curtains version 1.19.1 on Windows 10 Pro . Sometimes the Style Details XP Luna works from booting and sometimes it changes to something else then it changes back to XP Luna. after a reboot. Edition Windows 10 Pro Version 21H2 Installed on ‎6/‎25/‎2021 OS build 19044.1566 XP Luna not working, not my choice <img src="https://cdn.stardock.us/forums/48/97/4897609/1f6cbbf3-a7b1-48bc-82f6-e9aa6c4fc51e.png" alt

Reply to Fences does not come up when a boot is finished, no ICONs displayed of apps after rebooting is finished in Fences Stardock Forums

It is fixed now. I reinstalled it again and now it works. Thank you for your help, Jim

Reply to Fences does not come up when a boot is finished, no ICONs displayed of apps after rebooting is finished in Fences Stardock Forums

It has happened three times. The first two times I did not do anything. It does not do it every time I start up. I will uninstall it and reinstall it. Thanks for your help, Jim

Reply to Fences does not come up when a boot is finished, no ICONs displayed of apps after rebooting is finished in Fences Stardock Forums

Thanks for your quick reply. Started Fences from All Program list: Basic Options = Enable Fences CTRL,ALT, DELETE to Start Task Manager Task manager Startup TAB= Fences Settings Enabled, Low &n

Fences does not come up when a boot is finished, no ICONs displayed of apps after rebooting is finished in Fences Stardock Forums

When I boot after turning on my laptop, Fences does not display and all ICONs of my apps do not show. I tried to double click to make sure that I did not do a clear screen display. Fences 3.1.3.3. Windows 10 Pro 21H2 - OS Build 19044.1348. Is the problem Fences or Windows 10? Thge only way out is to reboot.

Reply to Start11 in Start Menu Products Stardock Forums

Thank you for the answer I was looking for.

Reply to Start11 in Start Menu Products Stardock Forums

This does not answer my question correctly. If I can add Start11 to up to five computers for Windows 11, why does it tell me it is on another computer. I understand that I can install it on up to five computers. PLEASE READ above again.

Start11 in Start Menu Products Stardock Forums

Why does Start11 tell me it is active on another computer when I install it on a new computer. It is active on four computers. I thought that I could activate it on up to five computers. I have updated four of my computers to Windows 11. Start10 does not work with Windows 11.

Reply to Multiplicity Testing in Multiplicity Stardock Forums

I found out that drag and drop does work in KVM mode. This comes from a Tour of Multiplicity KVM from Stardock. I have decided not to purchase Multiplicity. Thank you for your quick responses.

Reply to Multiplicity Testing in Multiplicity Stardock Forums

Thanks for all of your help. I still do not know why it connects and does not allow control. But if I try it enough times it works.

Reply to Multiplicity Testing in Multiplicity Stardock Forums

Thanks for making the Seamless connection clear. The last three times I connected to the secondary PC from the sidebar. I could not control the secondary PC at all. I did it three times because I wanted to make sure that I did not do anything wrong. I just tried it again for the fourth time from the sidebar. It connected but no control at the secondary PC. I read all the help items from Multiplicity FAQ web page. The box from the advanced settings that Prevents flicker from sw

Reply to Multiplicity Testing in Multiplicity Stardock Forums

I have done more testing. You are right. Drag and drop does not work now. But it did once. Since I only have one monitor in use for Multiplicity I make the connected screen (secondary PC) take up half the screen (vertically) and I can copy/paste either way (primary to secondary or secondary to primary) every time or Multiple times. After many tests in connecting to the secondary machine using KVM mode, I was able to control the secondary PC every time but one. When it did not work, I

Reply to Multiplicity Testing in Multiplicity Stardock Forums

Brought up means I used the sidebar to connect to the secondary PC. I jst tested the copy/paste function by changing the size of the secondary screen and used drag and drop from the secondary to the primary PC. What I had to do is: 1. Close the sidebar on the primary PC. 2. Then Unloaded Multiplicity using the task bar ICON. 3. Started Multiplicity again on the primary PC, clicked on "Open sidebar. 4. Clicked on connect to the secondary PC from the side

Reply to Multiplicity Testing in Multiplicity Stardock Forums

Clipboard history and Sync across devices are both off. I chose a long time ago to not sync any of my devices, PC or cell phone.